Adjust Display Brightness

Last modified: Sep 06, 2024

Connection Guide:


  1. Ensure both the monitor and computer are powered off.
  2. Connect the HDMI cable (or VGA cable) to both the computer and monitor.
  3. Attach the USB touch cable to both the computer and monitor.
  4. Connect the power cord.
  5. Plug in and power on the monitor first, then turn on the computer.


Note:

Our open frame series touch monitors are driver-free.

The touch monitor is shipped in the 'ON' state for your convenience.


Operation Guide:


OSD Controller


OSD Button Instruction:

  1. Auto: Recall defaults / Cancel Selection / return to Superior menu
  2. Left: Select previous menu / Decrease Brightness
  3. Power: Power status(ON/OFF)
  4. Right: Select next menu / Increase brightness
  5. Select: Select Submenu to enter
  6. Menu: ODS Menu / Select Options


Adjusting Touchscreen Brightness:

Note: Use the MENU button to open or select options, and navigate with the LEFT or RIGHT buttons. Before adjusting touchscreen brightness, ensure the following:

  1. Monitor and computer are switched on, and they connected with HDMI/VGA cable. 
  2. OSD Controller must be in active status which means the light of ON/OFF should be green.


Steps for adjusting brightness:

  1. Access OSD Controller System (Press MENU button to start)
  2. Navigate to the Picture option (Press MENU button to enter submenu of Picture)
  3. After pressing the MENU button once, the screen will display picture options.
  4. Press the MENU button again to highlight the Auto Color Management option. Please note to press the MENU button promptly as the OSD Controller system will disappear within 5 seconds. If the OSD Controller system disappears, you will need to repeat the process.
  5. Navigate the highlight rectangle up or down by pressing the LEFT or RIGHT button.
  6. Access the Adjusting Brightness or Contrast Submenu (use MENU button for selection).
  7. Use the MENU button to choose either Brightness or Contrast option.
  8. Then, use the LEFT and RIGHT buttons to adjust the screen's brightness and contrast. Note: If the option is highlighted with a yellow background, it indicates the option has been selected.
  9. Press the AUTO button to exit selection. If the option does not have a yellow background color, it means the option is not selected.